شرح كامل لتوصيلات كابل الشبكة RJ-45

كاتب الموضوع

من فضلك أقرأ الموضوع بعمق وأضف رد يعبر عن فهمك لمضمونه

مصر

عدد الرسائل : 149
نقاط التقييم : 19799

^ : ^

موضوع: شرح كامل لتوصيلات كابل الشبكة RJ-45

2011-02-24, 12:59

أنت الرقيب على نفسك

		المصدر :- منتدى الشبكة العربية
إضافة تقييم للموضوع		الكاتب :- مصر

RJ-45

The RJ-45 connector is commonly used for network cabling and for
telephony applications. It's also used for serial connections in special
cases. Here's a look at it:

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]

Pinout for Ethernet

Although used for a variety of purposes, the RJ-45 connector is
probably most commonly used for 10Base-T and 100Base-TX Ethernet connections.

Pin #	Ethernet 10BASE-T 100BASE-TX	EIA/TIA 568A	EIA/TIA 568B or AT&T 258A
1	Transmit +	White with green strip	White with orange stripe
2	Transmit -	Green with white stripe or solid green	Orange with white stripe or solid orange
3	Receive +	White with orange stripe	White with green stripe
4	N/A	Blue with white stripe or solid blue	Blue with white stripe or solid blue
5	N/A	White with blue stripe	White with blue stripe
6	Receive -	Orange with white stripe or solid orange	Green with white stripe or solid
7	N/A	White with brown strip or solid brown	White with brown strip or solid brown
8	N/A	Brown with white stripe or solid brown.	Brown with white stripe or solid brown.

Because only two pairs of
wires in the eight-pin RJ-45 connector are used to carry Ethernet signals, and
both 10BASE-T and 100BASE-TX use the same pins, a crossover
cable made for one will also work with the other.
Also, please note that it is very important that a single pair be used for
pins 3 and 6. If one conductor from one pair is used for pin 3 and a
conductor from another pair is used for pin 6, performance will degrade.
See the following figure.

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
To learn more about Ethernet, check out Charles Spurgeon's
Ethernet Reference.

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
RJ-45 Pinout for RocketPort

The following chart shows the pinout for RJ-45 connectors used
on certain RocketPort serial interface cards (manufactured by Comtrol).

PinName/Description

1	Request To Send
2	Data Terminal Ready
3	Ground
4	Transmit Data
5	Receive Data
6	Data Carrier Detect
7	Data Set Ready
8	Clear To Send

[ندعوك للتسجيل في المنتدى أو التعريف بنفسك لمعاينة هذه الصورة]
Pinouts for ISDN

Here's an ISDN BRI U port pinout for a Cisco 750 series
router:

PinFunction

1	Not used
2	Not used
3	Not used
4	U interface network connection (tip)
5	U interface network connection (ring)
6	Not used
7	Power (pass-through to S connector)
8	Ground (pass-through to S connector)

The following chart shows the pinout for RJ-45 connectors used
on certain ISDN S/T interfaces. For more info, see ANSI T1.605.

PinColorName/Description

1	White/Orange	N/A
2	Orange	N/A
3	White/Green	Receive+
4	Blue	Transmit +
5	White/Blue	Transmit -
6	Green	Receive -
7	White/Brown	-48VDC (optional)
8	Brown	-48VDC Return (optional)